Hi,
I’ve been thoroughly enjoying using the Altos V2 Radar recently—thank you for providing such a powerful sensor.
At our institute, we’re currently operating four Altos V2 radar units simultaneously on a single vehicle. We’re in the process of building a camera-radar fusion system, but we’re encountering some challenges with multi-sensor synchronization.
I’ve already configured PTP settings across all five radars, and they’re operating on a shared timeline without issue. However, for precise sensor fusion, we need tighter synchronization—ideally having all radars and cameras capture data at the exact same moment.
Our camera system is currently synchronized using an external trigger. I came across information on your official product pages (e.g., Altos Radar - Product, ALTOS-3P-V2 by Altos Radar Inc. | TI.com) indicating that Altos V2 supports external triggering. However, I recently received information indicating that the external trigger function is not yet available for use.
Could you let me know if there are any planned firmware or hardware updates to enable external triggering for the Altos V2? This capability would greatly help in achieving full sensor synchronization.
Thank you for your support.